I run A/A SRX 5000 series now, and I would advise against it. They aren't really designed for that, and the hello messages that would be required between chassis didn't play so well over MPLS when I tried it.
On Aug 31, 2010, at 13:08 , Stefan Fouant wrote: >> -----Original Message----- >> From: [email protected] [mailto:juniper-nsp- >> [email protected]] On Behalf Of Fahad Khan >> Sent: Tuesday, August 31, 2010 10:55 AM >> To: [email protected] >> Subject: [j-nsp] SRX5800 HA over 40 KM >> >> Hi folks, >> >> Can I place two SRX 5800 in separate DCs in HA and the distance in >> between >> these two Data centers is around 40 Km. >> >> has any body experienced it?? > > It can be done under certain circumstances but it bears getting additional > information before an answer can be given. > > Are these for private services or publicly available services. Are you > planning on doing A/A or A/P and from a routing perspective how to you > intend on failing respective flows from one data center to another, i.e. > Anycast, etc... > > Thanks, > > Stefan Fouant, CISSP, JNCIEx2 > www.shortestpathfirst.net > GPG Key ID: 0xB5E3803D > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
