Haven't tried them yet, no. The application is a full routing table inside a VRF, which is being exported to 'lesser' devices which can't handle a full table.
David On 31 August 2010 11:56, Keegan Holley <[email protected]> wrote: > Have you tried any of the other suggestions? I don't think I've ever had > to export a group of routes and then filter then anyway. Just out of > curiosity where did this requirement come from? Route reflection usually > provides enough reduction in the routing table size. > > > > On Tue, Aug 31, 2010 at 10:44 AM, David Ball <[email protected]> wrote: > >> Thanks Krasimir. I'd run across that knob previously, but my >> understanding >> is that the functionality provided by vpn-apply-export is enabled when a >> router is configured as a route-reflector, which mine are already. Will >> give it a whirl anyways, though. >> >> David >> >> >> On 31 August 2010 04:25, Krasimir Avramski <[email protected]> wrote: >> >> > You probably missing " vpn-apply-export" stanza in your bgp cluster >> group. >> > >> > HTH >> > Krasi >> > >> > On Mon, Aug 30, 2010 at 11:25 PM, David Ball <[email protected]> >> wrote: >> > > Ts/MXs running 10.0.R3.10 >> > > >> > > I don't have access to my actual configs, but think I can verbalize >> > > anyways. >> > > >> > > Does anyone know if it's possible to filter a given VRF route prior >> to >> > > export to an iBGP peer? Naturally, the route itself includes an RD >> and >> > RT, >> > > and I can't get my 'match' clauses to work. >> > > >> > > I've been trying matching on things like community (ie. community >> > SOMENAME >> > > members target:###:###), on RIB (ie. rib bgp.l3vpn.0), and also using >> a >> > > route-filter (which I don't believe supports VRF routes), but with no >> > > success. For interest's sake, I'm running in 'route-reflector-ready' >> > mode, >> > > in that routes are being exported from bgp.l[2|3]vpn.0 rather than >> from >> > the >> > > individual routing tables themselves, hence my trying to match on the >> > > bgp.l3vpn.0 RIB instead of an individual VRF's RIB. >> > > >> > > I was sure I saw a workaround listed here, but can't find it in the >> > > archives for the life of me. >> > > >> > > David >> > > _______________________________________________ >> > > juniper-nsp mailing list [email protected] >> > > https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > >> > >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
