On another note.. Has anyone tested the inline services of the Trio chipset? Meaning GRE, IP-IP, JFlow, etc.. ??
On Tue, Aug 31, 2010 at 9:00 PM, Derick Winkworth <[email protected]>wrote: > You know, just as this thread popped up on this list, we were dealing with > a > multicast related issue... On an MX if you statically map a unicast IP > address > to a multicast mac address, you have to specify a single l2 interface to > forward > that traffic out of. It essentially defeats the whole purpose of creating > the > mapping in the first place. > > So I thought, what if we connect to ports on the same box together? This > worked. Essentially you create a logical interface on one end of the cable > and > you move your layer 3 config to it for that particular VLAN, then the other > end > of the cable is just a trunk port. > > > This might resolve your issue. > > > > > ________________________________ > From: Chris Evans <[email protected]> > To: Derick Winkworth <[email protected]> > Cc: [email protected] > Sent: Tue, August 31, 2010 11:45:58 AM > Subject: Re: [j-nsp] 10.3 on MX960 with MPC only? > > > Agreed if they offering the mx as an Ethernet switch this should be > supported. Nag your account team. I had them put in an enhancement > request > but who knows if they are listening. > > > "Its not supported" is the wrong phrase. "Its broken" is more > appropriate. > >Whatever design choices that were made in the past that led to this, as > you > >said, "mind-blowing" caveat, Juniper needs to go backwards and fix it. > > > > On Tue Aug 31st, 2010 8:01 AM CDT Chris Evans wrote: > > > >>Try configuring an irb, igmp, igmp-snooping and a trunk port on 10.x > code. > >>It will tell you its not supported. It's never been supported per JTAC. > >>Also as per jtacs comment they put that statement in newer code as they > >>didn't know it wasnt supported before. I asked jtac to update the > >>documentation. > >> > Is this in documentation somewhere? I just did a quick pass through > the > >>IGMP > >>> snooping docs and I did not see it stated anywhere in there... maybe I > >>missed > >>> it. > >>> > >>> > >>> > >>> > >>> > >>> ________________________________ > >>> From: Derick Winkworth <[email protected]> > >>> To: Chris Evans <[email protected]>; Gavin Tweedie < > [email protected]> > >>> Cc: [email protected] > >>> Sent: Tue, August 31, 2010 7:13:37 AM > >>> Subject: Re: [j-nsp] 10.3 on MX960 with MPC only? > >>> > >>> ########### > >>> I'm not even going to mention that > >>> > >>> IGMP-Snooping isn't support on trunk interfaces which blows my mind. > >>> ############ > >>> > >>> > >>> wow! > >>> _______________________________________________ > >>> juniper-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > >>> _______________________________________________ > >>> juniper-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
