On Thu, Sep 2, 2010 at 9:21 PM, Harris Hui <[email protected]> wrote:
>
> Hi all,
>
> The J-6350 in JUNOS 10.0R3.1 can disable the security context (flow-based
> forwarding) and use it as a Router Context (IPv4 Packet-based forwarding).
> I had tested this on a single J-6350 box.
>
> Did anyone tested to disable the security context and enable the router
> context in a chassis cluster configuration? If yes, could you share the
> experience with me? Thanks a lot!
I would imagine that this can be done, but admittedly, I've never run
"router mode" in a chassis cluster.
Check out the factory-included
/etc/config/jsr-series-routermode-factory.conf file. It sets some
other things under security { } as well, like disabling TCP SYN and
sequence checking.
Cheers,
jof
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
