Hi Callum, currently IPv6 on LAG is not supported. 12.1.0 should have this feature and the last information I have is that this will be released in the middle of 2011.
Regards, Ahmad > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:juniper-nsp- > [email protected]] Im Auftrag von Callum Barr > Gesendet: Dienstag, 14. September 2010 03:41 > An: [email protected] > Betreff: [j-nsp] IPv6 on LAG Bundles - Juniper E-Series > > Hi All, > > > > Do any of you know if it is possible to run IPv6 over a LAG bundle on an E320? > > > > Whenever I try to configure anything to do with IPv6 on a lag interface I get > the following; > > > > t-rex:lab(config-if)#ipv6 address xxxx:xxxx:dead:beef::1/64 > > % lower layer bind failed > > > > Is this expected behavior? It seems rather retarded if v6 isnt supported on a > lag bundle, but it is supported on pretty much every other interface under the > sun. > > > > Cheers, > > > > Callum Barr > > Network Engineer > > worldxChange Communications > > > > @: [email protected] > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp Sitz der NK Networks & Services GmbH: Von-der-Wettern-Straße 15, 51149 Köln Registergericht: Amtsgericht Köln, Registernummer HRB 30805 Geschäftsführer: Tonis Rüsche, Bernard Latour _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
