If you have to go down this road, the following is a good guide: http://www.juniper.net/techpubs/software/junos/junos50/swconfig50-routing/html/instance-config5.html
Note if you want to put the BGP default route in the other instance as well, you have to define the rib-group under edit protocols bgp -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Henri Khou Sent: Tuesday, 14 September 2010 6:37 PM To: [email protected] Subject: [j-nsp] Multiple ospf process on juniper EX Hello, I'm trying to find the best way to redistribute BGP default route to 2 independant organizations running OSPF with a different cost for each organization. I am used to Cisco IOS where you can run 2 OSPF instance by specifying a process ID for every OSPF instance. How can I do that under JunoS? Thank you very much. -- Henri KHOU Administrateur Systèmes& Réseaux EHESS - CRI 54 Bd Raspail 75006 Paris Tel: 01 49 54 24 79 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
