"mismatch between remote-net and local-net" can you elaborate ?
regards Muhammad Fahad Khan JNCIP - M/T # 834 IT Specialist Global Technology Services, IBM [email protected] +92-301-8247638 Skype: fahad-ibm http://pk.linkedin.com/in/muhammadfahadkhan On Wed, Sep 15, 2010 at 5:27 PM, Morten Isaksen <[email protected]> wrote: > I had the same problem (between a SRX and a Cisco box). > > It is most likely a mismatch between remote-net and local-net > configurations on each router. > > Try to enable traceoptions. > > edit security ike traceoptions > [edit security ike traceoptions] > set file size 1m > set flag policy-manager > set flag ike > set flag routing-socket > commit > > And check the kmd log. > > /Morten > > On Wed, Sep 15, 2010 at 1:27 PM, Fahad Khan <[email protected]> wrote: > > Hi folks, > > > > I am trying to establish route based VPN between SRX3600(in Ch cluster) > and > > SRX210, but stuck in phase 2 (no proposal chosen).. > > > > has any one experienced it?? > > > > thanks in adv > > > > regards, > > > > Muhammad Fahad Khan > > JNCIP - M/T # 834 > > IT Specialist > > Global Technology Services, IBM > > [email protected] > > +92-301-8247638 > > Skype: fahad-ibm > > http://pk.linkedin.com/in/muhammadfahadkhan > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > -- > Morten Isaksen > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
