Does it appear as 'dscp' in the config under [edit class-of-service classifiers] after you pasted and committed? Or is it dscp-ipv6 there too? If it says dscp, it sounds like a bug to me. *shrug*
David On 15 September 2010 10:08, Bill Blackford <[email protected]>wrote: > Not having much experience with QOS other than accepting vendor/industry > recommendations, I used the exact steps in this document to set up a test. > > http://www.juniper.net/us/en/local/pdf/implementation-guides/8010010-en.pdf > > > > set class-of-service classifiers dscp branch_classifiers import default > set class-of-service classifiers dscp branch_classifiers forwarding-class > voice loss-priority low code-points 101110 > set class-of-service classifiers dscp branch_classifiers forwarding-class > video loss-priority low code-points 100110 > set class-of-service classifiers dscp branch_classifiers forwarding-class > video loss-priority high code-points 100100 > set class-of-service classifiers dscp branch_classifiers forwarding-class > video loss-priority high code-points 100010 > set class-of-service classifiers dscp branch_classifiers forwarding-class > business_applications loss-priority low code-points 010010 > set class-of-service classifiers dscp branch_classifiers forwarding-class > business_applications loss-priority low code-points 011010 > set class-of-service classifiers dscp branch_classifiers forwarding-class > business_applications loss-priority high code-points 010100 > set class-of-service classifiers dscp branch_classifiers forwarding-class > business_applications loss-priority high code-points 011100 > set class-of-service forwarding-classes class voice queue-num 5 > set class-of-service forwarding-classes class video queue-num 4 > set class-of-service forwarding-classes class business_applications > queue-num 2 > set class-of-service interfaces ge-0/0/0 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/0 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/1 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/1 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/2 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/2 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/3 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/3 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/4 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/4 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/5 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/5 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/6 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/6 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ge-0/0/7 scheduler-map branch_scheduler > set class-of-service interfaces ge-0/0/7 unit 0 classifiers dscp > branch_classifiers > set class-of-service interfaces ae0 scheduler-map branch_scheduler > set class-of-service interfaces ae0 unit 0 classifiers dscp > branch_classifiers > set class-of-service scheduler-maps branch_scheduler forwarding-class > network-control scheduler nc_scheduler > set class-of-service scheduler-maps branch_scheduler forwarding-class voice > scheduler voice_scheduler > set class-of-service scheduler-maps branch_scheduler forwarding-class video > scheduler video_scheduler > set class-of-service scheduler-maps branch_scheduler forwarding-class > business_applications scheduler bapp_scheduler > set class-of-service scheduler-maps branch_scheduler forwarding-class > best-effort scheduler be_scheduler > set class-of-service schedulers nc_scheduler buffer-size percent 5 > set class-of-service schedulers nc_scheduler priority strict-high > set class-of-service schedulers voice_scheduler buffer-size percent 5 > set class-of-service schedulers voice_scheduler priority strict-high > set class-of-service schedulers video_scheduler transmit-rate percent 50 > set class-of-service schedulers video_scheduler buffer-size percent 15 > set class-of-service schedulers video_scheduler priority low > set class-of-service schedulers bapp_scheduler transmit-rate percent 35 > set class-of-service schedulers bapp_scheduler buffer-size percent 25 > set class-of-service schedulers bapp_scheduler priority low > set class-of-service schedulers be_scheduler transmit-rate remainder > set class-of-service schedulers be_scheduler buffer-size remainder > set class-of-service schedulers be_scheduler priority low > > > Now when I issue the following, I see my Type as being 'dscp-ipv6'. > > b...@test-ex3200-24t# run show class-of-service interface ge-0/0/0 > Physical interface: ge-0/0/0, Index: 131 > Queues supported: 8, Queues in use: 6 > Scheduler map: branch_scheduler, Index: 48327 > > Logical interface: ge-0/0/0.0, Index: 2684275700 > Object Name Type > Index > Classifier branch_classifiers dscp-ipv6 > 25751 > > The example shown in the guide shows Type of 'dscp' > > Am I missing something? > > Thanks, > > -b > > -- > Bill Blackford > Senior Network Engineer > Technology Systems Group > Northwest Regional ESD > > Logged into reality and abusing my sudo priviledges > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
