You can do cos classification for the outbound traffic. I never tried do filtering for outbound. But you can use an apply-group for all interfaces.
Rgs On 9/16/10, Jonathan Lassoff <[email protected]> wrote: > I'm trying to setup some filtering on my loopback and WAN interfaces > to only filter RE-bound traffic. > > I'm doing this by applying a "filter input" term to the iff-level > (interface xxx unit xxx family [inet/inet6]), but this filter seems to > also catch traffic being forwarded from the WAN interfaces, so the > filter is affecting downstream traffic as well. > > On platforms I've used in the past (M and MX -- "real" PFEs), these > filter terms only catch locally-bound traffic and not things > transiting the router. Is there a way to do some sort of similar > classification on J-series as well? > > I have my box configured with the included "router" mode template > (packet-based forwarding, all interfaces in a trusted security zone, > etc.) > > Cheers, > jof > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from my mobile device ./diogo -montagner _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
