Hi there..
I'm working with an MX480 running 10.0R3.10 trying to get Netflow 5
exporting up and running.... been reading some of the docs from Juniper and
must be reading the wrong info because what they talk about I don't see ;)
First, firewall filter:
filter cflowd {
term sampled_packets {
from {
source-address {
0.0.0.0/0;
}
}
then accept;
}
term other {
then accept;
}
}
Then forwarding options:
sampling {
input {
rate 1;
run-length 0;
max-packets-per-second 7000;
}
family inet {
output {
flow-server xx.xxx.xx.2 {
port 5000;
source-address xx.xx.xxx.59;
version 5;
}
}
}
}
When I apply this as input on an interface I see nothing hitting the netflow
system.... the docs talk about "sampling output" instead of "sampling family
inet" but I have no option for "sampling output"
Confused I am ;) Doesn't take much ... (oh, and yes I want 1:1 sampling at
this point simply because the traffic levels will allow it in the short
term)
Paul
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
