Hi Group, Can I realy be true that it is not possible to have both vlan tagged and untagged subinterfaces son the same physical interface on the EX4200 without using "fam. eth-switching" ?
I have the following configuration: set interfaces ge-0/0/10 vlan-tagging set interfaces ge-0/0/10 unit 10 vlan-id 10 set interfaces ge-0/0/10 unit 10 family inet address 192.168.100.1/24 set interfaces ge-0/0/10 unit 20 vlan-id 20 set interfaces ge-0/0/10 unit 20 family inet address 192.168.101.1/24 But what if I also would like to route traffic that is untagged on the same interface ? Kind Regards, Peter Krüpl _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
