Just wondering if anyone else has experienced anything like this before on the EX4200 platform.
This morning users started complaining that there ips were flapping, they would work for 5 minutes then stop working for 5 minutes. What seemed to fix this issue was clearing the ARP table. This switch has all customer vlans and routes customer subnets. Another thing i noticed was... 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:71 "public ip here" vlan.13 none 00:06:5b:f1:f0:72 "public ip here" vlan.13 none 00:06:5b:f1:f0:71 "public ip here" vlan.13 none One customer has a firewall, and its outside interface has all the above ips assigned to it. Its outside interface has the :71 mac address. For some reason :72 is showing up and that is the firewalls inside interface. During this time, the ips attached to the :71 interface were working, the :72 were not. When i cleared the ARP, all ips had :71 again. I am running 9.3R4.4. Has anyone seen this, or have any ideas? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
