> -----Original Message----- > From: [email protected] [mailto:juniper-nsp- > [email protected]] On Behalf Of Eric Van Tol > Sent: Wednesday, September 29, 2010 6:19 AM > To: juniper-nsp > Subject: [j-nsp] L2VPN MTU Issue > > Hi all, > I'm having an issue with an L2VPN customer at the moment. They need to be > able to pass 1500-byte IP packets between two locations connected via an > ethernet encapsulated L2VPN. I am able to ping from PE to PE with 1500-byte > sized packets with the df-bit set without a problem. The L2VPN connection is > up and the customer can get a max of 1490-bytes through without > fragmentation. My LSP shows an MTU of 1500:
For historic purposes, the solution was to change my MPLS MTU to 1528 throughout the network. Now that I see the number, it should have been more obvious to me. Thanks to those who responded, but public and private. -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
