I tried with vpls configuration and it worked neatly, had to turn on bgp, ospf and rsvp, now I can transport any vlan from site to site, and even add one site without disrupting traffic, point-to-multipoint and link redundancy are main benefits.
-----Original Message----- From: Herro91 [mailto:[email protected]] Sent: viernes, 24 de septiembre de 2010 09:40 a.m. To: Correa Adolfo Subject: Re: [j-nsp] ethernet vlans over redundant carrier networks If you just want redundancy over parallel links you could just use two different sets of source IPs (one per ethernet circuit) and you "should" be able to setup two independent tunnels (one per path). are cpA and cpB switches? If so, you'll want to be conscious of spanning tree. HTH... On Thu, Sep 23, 2010 at 3:01 PM, Correa Adolfo <[email protected]<mailto:[email protected]>> wrote: Need to connect site A and B through 2 carriers l2 ethernet circuits. cpA----peA------carrier------peB-----cpB primary link ----peA------carrierB----peB---- redundant link Thinking in installing j2320 as peA and peB to receive both mpls links. cpA and cpB need to receive 802.1q vlans in just one interface. Customer will be tagging CoS How to configure a redundant l2vpn or l2circuit with mpls te? _______________________________________________ juniper-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
