I've personally never seen this. Maybe the power issues affected the flash inside the switch? I doubt the same would happen if you pulled the power cords from all switches at once for example.
On Wed, Oct 6, 2010 at 7:09 PM, TiM <[email protected]> wrote: > Has anyone seen an issues where, once a stack looses power (all at once, > sadly), some members of the stack come up with corrupt JunOS on them? > > We have a stack of 6 EX4200's. Due to a power issue, all 6 lost power at > the same time. When power was restored, the Master, the Backup and one > linecard mode switch came up fine. The 3 other linecard mode switches > didn't. On powerup they all reported shared libaries not being found and > similar "file not found" type errors. > > Reinstalling JunOS from the boot prompt has fixed the problem. > > Has anyone else encountered corrupt JunOS problems on EX4200's, > specifically in a stack configuration, before? > > Thanks! > > Tim > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
