I currently use the Nagios BGP plugin. It checks all BGP sessions and notifies if/when a neighbor goes into any non-established state.
On Thu, Oct 14, 2010 at 3:05 PM, Jonathan Call <[email protected]>wrote: > > Pick your favorite SNMP monitoring tool and have it use this OID: > > 1.3.6.1.2.1.15.3.1.2 (bgpPeerState) > > > > http://www.mibdepot.com/cgi-bin/getmib3.cgi?win=mib_a&i=1657&n=BGP4-MIB&r=inreach&f=rfc1657.mib&v=v1&t=tab&o=bgpPeerState > > > It presents each peer as an extension of the OID. So if you just want to > find the state of peer 192.168.243.233 you would do an snmpget of > > 1.3.6.1.2.1.15.3.1.2.192.168.243.233 > > Jonathan > > > Date: Thu, 14 Oct 2010 20:30:26 +0200 > > From: [email protected] > > To: [email protected] > > Subject: [j-nsp] BGP surveillance > > > > Hi, > > > > What do people use to monitor their BGP sessions on Juniper equipment? > > > > I've tried a couple of open source solutions, but my problem right now is > > that Juniper does not send which peer that went up/down in the snmp trap > > that get's generated. So I can configure an alarm that says BGP up/down > but > > I can't tell which session it concerns. > > > > Regards > > Johan > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- It has to start somewhere, it has to start sometime. What better place than here? What better time than now? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
