Hi bizza, Please check this link: http://www.juniper.net/us/en/community/junos/script-automation/library/event/enable-primary-nexthop/
You might need to edit the script to fit in your needs. On Mon, Oct 18, 2010 at 8:41 PM, bizza <[email protected]> wrote: > Hi all, > i'm trying to configure 2 isps on juniper srx210. > I started using the KB 15545 (juniper.net account required, > http://kb.juniper.net/KB15545). > Failover between the 2 isps works fine, but only if I unplug the cable > that connect srx and one router. > The next step is automatic failover when atm goes offline in primary > router. > I tried to look for a solution, and i found 2 possibilities: > - > http://forums.juniper.net/t5/Routing/Multiple-static-routes-test-next-hop/td-p/47513 > - > http://www.juniper.net/us/en/community/junos/script-automation/library/event/track-ip/ > > The first don't work in my configuration, and the second one appear > (to me) more powerful, but i'm not able to make it works. > > In /var/log/escript.log file i found > Oct 18 13:38:05 inspecting event output 'track-ip.slax' > Oct 18 13:38:05 finished event script 'track-ip.slax' > Oct 18 13:38:05 event script processing ends > > and i suppose it means that scripts are in correct path and system can > execute it, but the failover still work only if i unplug one cable. > > any suggestions? > > regards > Marco > -- > bizza > http://www.rm-rf.eu/ > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Best Regards, Wilson Sihombing _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
