Hi, You could do this... set logical-systems R1 interfaces lt-1/2/0 unit 1 encapsulation ethernet set logical-systems R1 interfaces lt-1/2/0 unit 1 peer-unit 2 set logical-systems R1 interfaces lt-1/2/0 unit 1 family inet address 100.100.100.1/24
and then set logical-systems R2 interfaces lt-1/2/0 unit 2 encapsulation ethernet set logical-systems R2 interfaces lt-1/2/0 unit 2 peer-unit 1 set logical-systems R2 interfaces lt-1/2/0 unit 2 family inet address 100.100.100.2/24 the secret sauce is in that "peer-unit" statement, which connects to two logical interfaces together. You can set the encapsulation to a few different types, which is kind of fun. Here is a pointer so some (older) documentation, it's what came up in a google search: http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-interfaces/html/interfaces-tunnel-config4.html Disclaimer: I work for Juniper. HTHs, Dave On Oct 20, 2010, at 10:36 AM, Giuliano Cardozo Medalha wrote: > People, > > We have a M7i with built in Tunnel interface - 800 Mbps. > > We need to create a logical interface to interconnect the default logical > system and a created one ... called R1. > > Router# set logical-systems R1 > > We need to establish a BGP connection between the two logical systems using > the logical interface. > > What is the best solution ? > > Use gr-1/2/0 interface > > or > > Use lt-1/2/0 interface ? > > When we try to use lt-1/2/0 ... the ip address does not appear in table > inet.0 (stays with protocol down status) > > Can someone help me with this configuration ? Is it possible ? > > Thanks a lot, > > Giuliano > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
