FTA:
"Note: You need to jumper the SSD to CS (cable select)"
I thought I had to set the drive jumper to Slave (not
CS) to get a replacement drive to work. But that was
over a year ago so my memory is fuzzy.
- Kevin
Jonas Frey (Probe Networks) wrote:
See cluepon:
http://juniper.cluepon.net/index.php/Replacing_the_harddisk_with_solid_state_flash
Am Mittwoch, den 20.10.2010, 17:19 -0400 schrieb Fernando Atilano:
Anybody that can provide as to how to replace a m10 hard disk? one of them
failed.
any feedback is greatly appreciated.
Fernando Atilano| Transtelco| Networking & Support
MX 52.656.257.1114
US 1.915.217.2286
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
------------------------------------------------------------------------
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
