Since you control the entire ecosystem, I would recommend the lower port cost of the 10ge interface.
Sent from my iThing On Oct 27, 2010, at 6:07 AM, "William Jackson" <[email protected]> wrote: > We are debating which is the better route to go. > > > > We already have STM-64/Ethernet capable ADM's and we were considering > which would be the best option? > > > > 1. Terminate the STM-64 circuits into our MX boxes using type 3 > FPC's. > 2. Use a 10Gig WAN-PHY setup on the MX on an Ethernet line card and > plug into an STM-64 interface on the ADM? > > > > Anyone got any experience with WAN-PHY setup and > recommendations/caveats? > > > > Will be running MPLS/IPv4/IPv6 over it > > > > thanks > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
