On Wed, Oct 27, 2010 at 11:25:27PM +0400, Pavel Lunin wrote: > Hi, > > Anyone here uses dynamic-db? Works? or as always? :)
I tried, but there is no support for it via Netconf, which pretty much makes it a non-starter for me. :) I'm sure something else about it is broken too, I just never got that far. The only other thing I noticed from the 30 seconds I played with it was that there is no way to abandon a candidate config when in dynamic-db mode. So if you change ANYTHING and want to not apply those changes, the only way to quit out and not leave the session stuck open with uncommitted changes is to manually undo the changes you made and commit the blank config. With failure to plan or test features like that, I'm sure it only gets worse from there. :P -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
