Thanks! I wonder why they tease me with the lt knob? ;) Doug Marschke Chief Technology Officer JNCIE-ER #3, JNCIE-M #41, JNCIS-FW, JNCI (415) 902-5702 (cell) (415)-358-4059 (fax) www.proteus.net
-----Original Message----- From: Alex [mailto:[email protected]] Sent: Thursday, October 28, 2010 3:25 AM To: Doug Marschke; [email protected] Subject: Re: [j-nsp] ho to tie 2 VR's together on EX4200 Doug, I think that for lt- interfaces to actually work You need either a T-PIC or "set chassis fpc X pic Y tunnel-services" knob and AFAIK neither is supported on EX http://www.juniper.net/techpubs/en_US/junos10.3/topics/reference/statement-h ierarchy/chassis-ex-series.html Rgds Alex ----- Original Message ----- From: "Doug Marschke" <[email protected]> To: <[email protected]> Sent: Thursday, October 28, 2010 12:41 AM Subject: [j-nsp] ho to tie 2 VR's together on EX4200 >I would figure an LT interface like other platforms but it doesn't allow >for > an encapsulation. Ideas? > > > > {master:0}[edit interfaces lt-0/0/0] > > l...@s13# show > > unit 0 { > > point-to-point; > > peer-unit 1; > > family inet { > > address 10.1.2.1/30; > > } > > } > > unit 1 { > > peer-unit 0; > > family inet { > > address 10.1.2.2/30; > > } > > } > > > > {master:0}[edit interfaces lt-0/0/0] > > l...@s13# commit > > [edit interfaces lt-0/0/0] > > 'unit 0' > > encapsulation needs to be configured for logical tunnel interface > > error: configuration check-out failed > > > > {master:0}[edit interfaces lt-0/0/0] > > l...@s13# set unit 0 ? > > Possible completions: > > <[Enter]> Execute this command > > accounting-profile Accounting profile name > > + apply-groups Groups from which to inherit configuration data > > + apply-groups-except Don't inherit configuration data from these groups > > bandwidth Logical unit bandwidth (informational only) > > description Text description of interface > > disable Disable this logical interface > > dlci Frame Relay data-link control identifier (1..1022) > >> family Protocol family > > mtu Maximum transmission unit packet size (256..9216) > > no-traps Don't enable SNMP notifications on state changes > > peer-unit Peer unit number (0..16385) > > point-to-point Point-to-point connection > > traps Enable SNMP notifications on state changes > >> tunnel Tunnel parameters > > vlan-id Virtual LAN identifier value for 802.1q VLAN tags > > | Pipe through a command > > { > > > > > > l...@s13# run show version > > fpc0: > > -------------------------------------------------------------------------- > > Hostname: s13 > > Model: ex4200-24t > > JUNOS Base OS boot [9.5R2.7] > > JUNOS Base OS Software Suite [9.5R2.7] > > JUNOS Kernel Software Suite [9.5R2.7] > > JUNOS Crypto Software Suite [9.5R2.7] > > JUNOS Online Documentation [9.5R2.7] > > JUNOS Enterprise Software Suite [9.5R2.7] > > JUNOS Packet Forwarding Engine Enterprise Software Suite [9.5R2.7] > > JUNOS Routing Software Suite [9.5R2.7] > > JUNOS Web Management [9.5R2.7] > > > > {master:0}[edit interfaces lt-0/0/0] > > > > > > > > Doug Marschke > > Chief Technology Officer > > JNCIE-ER #3, JNCIE-M #41, JNCIS-FW, JNCI > > (415) 902-5702 (cell) > > (415)-358-4059 (fax) > > www.proteus.net > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
