Did anyone ever get this resolved as we are facing the same issue. Nick
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Stewart Sent: 11 August 2010 00:52 To: [email protected] Subject: [j-nsp] Egress Policing / Layer2 Hi there. I haven't had time to lab this up due to travelling but we are trying to find a way to do egress policing on an EX switch for VLAN's - is there a such thing? I understand there is ingress policing? These are EX4200 switches primarily where a LAN service comes in one port and leaves on another (same switch) - any suggestions/hacks are welcome.. Thanks, Paul _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any offers or quotation of service are subject to formal specification. Errors and omissions excepted. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Lumison. Finally, the recipient should check this email and any attachments for the presence of viruses. Lumison accept no liability for any damage caused by any virus transmitted by this email. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
