I'm trying to setup an SRX in my office as a branch office with two ISP connections, and I'd like to run an IPSec path over each back to our datacenter. Ideally, I could terminate each tunnel on a separate st0 unit (ifl's of st0.0 and st0.1), but it seems that JunOS will only try to establish IPSec SPIs for VPNs that are bound to st0.0. I had a second bound to st0.1, but it would never even try to send IKE traffic to start the connection.
So, I've got some failover working now by doing hub-and-spoke (in a bit of a reverse fashion: one device at the datacenter, two paths to the branch device) style config -- both VPNs are tied to st0.0 which is configured as a multipoint interface. My only trouble now is directing st0.0 traffic down a specific interface, it seems like there isn't a way to tell it which VPN tunnel to prefer for sending traffic down. Any ideas or opinions on what the right way to do this is? I feel like two separate st0 units makes the most sense, but it's stumping me as to why it never tries to establish a session. Cheers, jof _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
