I don't see this as being possible. The whole point of OSPF is to provide consistent routing data across all routers in the area. If Juniper allowed filtering of internal routes being imported then that model could be broken. Everything I've read say JunOS can't filter internal routes from being imported.
----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Wed Dec 01 18:10:18 2010 Subject: [j-nsp] OSPF IMPORT POLICIES People, Hi, We are trying to filter OSPF Internal Routers from being installed into the RIB (Routing Table). JUNIPER has the correct command to filter input routes. set protocols ospf import <policy name> But when we create an import policy on our environment ... all the internal routes are not filtered and are installed onto the RIB. Is there any way to use policy routing to block the internal ospf routes to be installed onto the RIB ? it is possible to use rib-groups to redirect the ospf internal routes to another routing table ? Can you please give to me some guide ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp This message contains confidential information and is intended only for the individual named. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
