Hi Adolfo. What kind of traffic measurement do you want to realize?
In the more simple case I would use the monitor interface traffic detail command: i guess that this is not the best for you, beacuse you want to measure traffic between AS not contiguos. You will not be able to differentiate it.
On the other hand: the only thing you can do with a M7i to analize traffic (but only if you have a CFEB-E with the Multiservice Adaptive Module installed) is to use the cflowd active monitoring: this allows you to obtain various types of byte and packet counts of flows through a router.
Look at this link to get more info: http://www.juniper.net/techpubs/software/junos/junos70/swconfig70-policy/html/sampling-config20.html Hope it will be useful to you. Cristian Frizziero El 07/12/2010 13:34, Correa Adolfo escribió:
Hi I want to measure the traffic between my own AS and a remote (not directly connected) AS directly from an M7i box, how would it increase CPU usage? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
