you could try this knob: "set routing-options ppm no-delegate-processing"
On Wed, Dec 1, 2010 at 4:05 AM, Payam Chychi <[email protected]> wrote: > Hi, > > I was wondering if anyone else has had issues with M based routers and PPM, > if so, any advice would be greatly appreciated. > > Here is my situation: > - I have a m120 router that is now running BFD and IS-IS on a few links and > OSPF on a few other links (no problem here) > - when I take a backup feb out of backup (N+1 group) and map it to a fpc, > the router drops all ISIS neighbors. > > A deeper look into the issue showed that ISIS is dropping because of BFD, a > 3rd look showed that BFD was dieing due to the PPM > > I'm assuming that the issue is related with PPM running on both feb and re. > Are there any caveats in disabling PPM on the FEB and letting it run only > on the RE? > > I assume the performance would be lower as its done in software vs the hw > FEB but i cant imagine the difference to be noteworthy > > Thanks > Payam > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- BR! James Chen _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
