I was thinking on M10i with ECFEB and related PIC. Any comments or recommendations?
On Dec 27, 2010, at 9:34 PM, Jonathan Lassoff <[email protected]> wrote: > I guess that would depend on the hardware configuration that you have > in your 7206? What NPE are you using? > > Assuming you're using an NPE-G1, which can run a few GigE ports at 1 > Mpps, some comparable routers might be: > > Juniper J6350 -- A CPU-based router (more inexpensive) that'll route > 400 Kpps and connect a decent amount of GigE ports (52 GigE copper, > but probably not full duplex) > > Juniper M7i -- A real hardware-based router that'll do 10 GbE / 16 > Mpps (half-duplex). > > Juniper MX -- A nice mixed Ethernet / IP router that comes in several > configurations, but can support 48 GigE ports and will do 55 Mpps. > > Honestly, I would say that an MX would be the best long-term > investment if you're interested in checking out Juniper, want a robust > DOS-hardy edge router, but will also probably be the most expensive of > these suggestions. > > Get in contact with an awesome reseller and ask around about who has > the best deals as the "list price" is often way inflated. > > Many resellers will give you a good deal if you're checking out > Juniper for the first time, since they usually have way better > products that Cisco but cost a little more. It's easy to get hooked on > well-made routers :p > > Cheers, > jof _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
