Hi!
I'm facing a strange limitation on ex-4200 virtual-chassis:
vcp-interfaces are configured with mtu 1500:
s...@vsw02# run show interfaces vcp-0
Physical interface: vcp-0, Enabled, Physical link is Up
Type: 105, Link-level type: 70, MTU: 1514, Speed: 32000mbps
and not reconfigureable to use jumbo frames:
s...@vsw02# show | compare
[edit interfaces]
+ vcp-0 {
+ mtu 9216;
+ }
s...@vsw02# commit check
[edit interfaces]
'vcp-0'
Interface is not user configurable
error: configuration check-out failed
As a result, hosts within the same vlan but connected to different
VC members is not able to reach each other with big packets :(
Are there any way to overcome this limitation ?
--
In theory, there is no difference between theory and practice.
But, in practice, there is.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
