I'm starting to get logical-systems going on my M5, and I've hit something odd that I've not seen before, and Google isn't helping.
Juniper M5, running 10.0R2.10.
When I configure a loopback in a logical-system (eg, lo0.6 for one of
them) all seems fine. When I try and use lo0.6 as the source address for
an unnumbered address (aggregated SDH in this case) I get a commit error:
[edit logical-systems zeta interfaces as1 unit 0 family inet]
'unnumbered-address'
unable to get address from lo0.6
error: configuration check-out failed
I also get the same error when trying to use unnumbered-address on an LT
interface (as an aside, why only Ethernet & frame-relay options for LT
interfaces, PPP and/or HDLC would seem to make more sense, having no
encap at all would make even more)
If I try any other loopbacks I get:
[edit logical-systems zeta interfaces as1 unit 0 family inet
unnumbered-address]
'lo0.0'
referred interface must have address configured under family inet
error: configuration check-out failed: (statements constraint check failed)
Which seems right, so there's clearly something special happening.
--
Julien Goodwin
Studio442
"Blue Sky Solutioneering"
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
