All, Even we faced a similar problem on our MX's running 10.2R3. Further findings revealed memory leak bug for mib2d process.. restarting mib2d fixed it. Juniper is probably tracking it through some internal PR, the committed release is 10.2R3 which doesn't look likely.
Thanks & Regards Tarique Abbas Nalkhande -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard A Steenbergen Sent: 02 September, 2010 11:54 AM To: Chintan Pandya Cc: [email protected] Subject: Re: [j-nsp] SNMP polling issue MX On Thu, Sep 02, 2010 at 12:56:21PM +0530, Chintan Pandya wrote: > Hi All, > > We are facing issue in polling SNMP statistics on MX 960 sub-interfaces. > JUNOS 10.2R1.8 is running on router. > > The sub-interfaces statistics are not getting polled on the Reporter > software, where as the parent statistics are getting polled. > The SNMP statistics can be seen on the router. > The issue is with all types of interfaces AE, XE, GE. > > Nothing wrong seems with the configuration. Semi-known issue, see the discussion about bugs in 10.2 (in the Trio card thread) from a few days ago. We somehow stopped being able to replicate it, and it didn't seem like they had a PR on it back when we were looking, so please open a case on it. :) -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp ------Disclaimer------ This email and any files transmitted with are classified as confidential unless otherwise specified. This e-mail is intended solely for the use of the individual or entity to whom this e-mail is addressed. If you have received this email by mistake, please notify the sender and delete this e-mail immediately and permanently. Although measures were taken to free this e-mail and its attachments from any malicious code infection, it is the responsibility of the recipient to check this email and any attachments for the presence of such infection. The use of EEC(Mobily) e-mail service is limited for EEC(Mobily) business use only. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
