Jared Mauch writes:
>Just load them on the device and rollback and use commit-check as your middle
>step.
There's also the "test configuration" command:
user@cli> test configuration server:cli.conf
cli.conf 100% 29KB 28.6KB/s
00:00
server:cli.conf:986:(28) fpc value outside range 0..1 for '2/2/0.0' in
'so-2/2/0.0': so-2/2/0.0
[edit routing-instances one interface]
'interface so-2/2/0.0;'
fpc value outside range 0..1 for '2/2/0.0' in 'so-2/2/0.0'
warning: statement must contain additional statements
server:cli.conf:991:(28) fpc value outside range 0..1 for '3/2/0.0' in
'so-3/2/0.0': so-3/2/0.0
[edit routing-instances two interface]
'interface so-3/2/0.0;'
fpc value outside range 0..1 for '3/2/0.0' in 'so-3/2/0.0'
warning: statement must contain additional statements
error: configuration syntax failed
user@cli>
Thanks,
Phil
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
