Anyone on list know whether this only applies to DPC MPC line cards on chassis-based MX's (240, 480, 960) or would this include the MX80 as well?
http://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2010-12-112&actionBtn=Search <snip> PSN Issue : In Junos software releasess 10.2R2, 10.2R3, and 10.3R1 there are several issues related to interactions of the following features: Aggregate Interfaces Bridging/IRB Interfaces Juniper strongly recommends that customers running MX routing nodes with DPC, and MPC do not run Junos versions 10.2R2, 10.2R3, or 10.3R1 Solution: Junos software has been modified to correct these defects. The corrected code will be available in JUNOS release 10.2S5, 10.3R2, and later versions Solution Implementation: Customers using the MX routing node with Aggregate Interfaces, or Bridging features should upgrade to recommended Junos version </snip> Thanks, -b -- Bill Blackford Senior Network Engineer Technology Systems Group Northwest Regional ESD Logged into reality and abusing my sudo priviledges _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
