We have a m120 running 10.0R4.7 which is being used as an edge-router for
our group. It has a single link connected to the campus backbone
which is its path to off-campus nets. There are multiple leaf subnets
behind this m120.
Our campus IT group has picked a rfc1918 net to be used as a campus-scope
net (172.30/16) and I have been allocated a subset of that space.
I would like to configure selective NATing on a given subnet.
IE for local subnet 172.30.70/24 if the destination is a campus address
don't translate, if it's an off-campus address then NAT it to a routeable
address.
I tried setting up a routing instance and next-hop-service nat but
couldn't make it work.
Can somebody please point me at relevant documentation or some examples.
Thanks.
--
Dave Funk University of Iowa
<dbfunk (at) engineering.uiowa.edu> College of Engineering
319/335-5751 FAX: 319/384-0549 1256 Seamans Center
Sys_admin/Postmaster/cell_admin Iowa City, IA 52242-1527
#include <std_disclaimer.h>
Better is not better, 'standard' is better. B{
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
