802.1ad or 802.1ah? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Blackford Sent: Friday, February 04, 2011 11:46 AM To: 'juniper-nsp' Subject: [j-nsp] MX bridge-domains
I considered holding off on this question until I gained a better understanding on what I really need but then thought I'd like to head down the right path before I get too deep. The scenario: I have a need to carry customers on individual tags though the network to provide IP on the far end. Basically a simple access exchange. The UNI handoff could be an 'access' port or in some cases an NNI handoff from a NSP that's 'trunked'. In either case, I'm passing the customer tags through my network via 'vlan-bridge' and the use of 'bridge-domains'. The question: Should I place each customer in its own bridge-domain/vlan-id/unit # or would it make more sense to use a single bridge-domain and 'vlan-id-list'? Thank you, -b -- Bill Blackford Senior Network Engineer Technology Systems Group Northwest Regional ESD Logged into reality and abusing my sudo priviledges _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
