I have two EX4200s back-to-back mapping each copper GE port to the
corresponding copper GE port on the other over a 10GE uplink port, so a
total of 48 LSPs (24 ingress, 24 egress) and have no issues.
Not sure if there is a hard coded maximum as so far I've not found a limit.
On 8/02/2011 6:31 AM, Keegan Holley wrote:
Thanks. Is there an upper limit to how many LSP's the 4200 can support?
Also, can a cross connect be attached to a LSP that is forwarding vpn
traffic?
On Mon, Feb 7, 2011 at 5:11 PM, Humair Ali<[email protected]> wrote:
Hi Keegan
this is actually the case, this is one of the limitations of CCC setup, is
that it requires it's own LSP for each CCC connection ,
this is the main difference with the l2circuit/l2vpnwhere u can us the same
LSP for multiple traffic
On 7 February 2011 21:03, Keegan Holley<[email protected]> wrote:
Greetings all,
I'm playing around with CCC on EX4200's using MX/M's a P routers and I
was
just curious if there are any best practices for this. Juniper's website
was cryptic as always. One of the things I noticed was that each
cross-connect reqires it'uires it's own LSP. Just curious if this was
actually the
case or if I'm configuring something wrong.
Keegan
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Humair
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
