Hi all, It might be a silly question but i have a problem with mapping an LSP for specific VPN traffic.
We have 3 PE routers and running Layer3 VPN between them by using RSVP LSPs. We have also one VPLS customer between those routers. What i want to achieve is to map that VPLS traffic on a specific LSP and to prevent other L3 VPN traffic to use it. Firstly i created a dedicated LSPs with higher preference which make them not active for all other L3 VPN traffic. And then i configured a policy with install next-hop lsp config with matching VPLS community. So far so good...But my VPLS traffic is still choosing other LSPs because of lower preference values. Question 1: Is this really required to keep preference values identical? Question 2: If it is really required, how can i prevent other L3 VPN traffic to use my VPLS dedicated MPLS LSP? Thanks and regards, Gokhan Gumus _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
