Thanks for the responses everyone. Think I got all the info I need. Max
On Tue, Feb 15, 2011 at 1:45 AM, Jonas Frey (Probe Networks) < [email protected]> wrote: > Hi, > > RE-333 max is 768 MB. Yes it will be enough for a v4+v6 feed. > You should also consider upgrading your SBC memory. See > http://juniper.cluepon.net for unofficial upgrades. > Latest JunOS that will work is 9.2 due to non FPC-E. > You also need 1G CF for that within your RE-333 to work. > > There once was a RE-600 for the M40 which is part number RE-M40-600-2048 > but these are very hard to find. > > Regards, > Jonas > > Am Montag, den 14.02.2011, 15:47 -0600 schrieb Max Pierson: > > Hi List, > > > > > > I have an old M40 (non-E) that I would like to upgrade as much as > possible. > > I have RE-333's currently. Question is how much memory can this guy hold > and > > will that be enough to take a full v4 + v6 table?? Also, what is the last > > version of Junos that can run on this kit after I max out the memory and > CF > > on it?? And lastly, is the RE-333 the best that can go in this chassis?? > > > > Looked on cluepon, but didn't find the answers, so sorry if this has been > > hashed 1000 times already. Might as well make it 1001 :) > > > > TIA, > > M > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
