Hi Vlad,
Here's an example:
Router 1:
ge-0/0/4 {
vlan-tagging;
unit 200 {
vlan-id 200;
family inet {
address 172.20.200.2/24 {
vrrp-group 10 {
virtual-address 172.20.200.1;
priority 200;
accept-data;
track {
interface ge-0/0/3.0 {
priority-cost 101;
}
}
}
}
}
}
unit 201 {
vlan-id 201;
family inet {
address 172.20.201.2/24 {
vrrp-group 20 {
virtual-address 172.20.201.1;
priority 100;
accept-data;
}
}
}
}
}
Router 2:
ge-0/0/4 {
vlan-tagging;
unit 200 {
vlan-id 200;
family inet {
address 172.20.200.3/24 {
vrrp-group 10 {
virtual-address 172.20.200.1;
priority 100;
accept-data;
}
}
}
}
unit 201 {
vlan-id 201;
family inet {
address 172.20.201.3/24 {
vrrp-group 20 {
virtual-address 172.20.201.1;
priority 200;
accept-data;
track {
interface ge-0/0/3.0 {
priority-cost 101;
}
}
}
}
}
}
}
HTHs..
Jared
--- On Wed, 2/16/11, Vlad Ion <[email protected]> wrote:
> From: Vlad Ion <[email protected]>
> Subject: [j-nsp] VRRP help needed
> To: [email protected]
> Date: Wednesday, February 16, 2011, 3:28 AM
> Hi,
>
> I want to configure VRRP for 2 vlans on an interface from a
> J2320 but I
> can't seem to find a proper example... can someone please
> lend a hand with a
> simple example to create and apply 2 VRRP groups, one for
> each vlan?
>
> Thanks in advance !
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
