We had a similar issue after a RE reboot, basically the PFE doesn't re-initialize clean after the reset. Try this FPC in a different slot to see if it comes up & simultaneously a spare (Working) FPC in slot 2. Based on the outcome you can then request a RMA.
Thanks & Regards Tarique Abbas Nalkhande -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ido Szargel Sent: 20 March, 2011 2:51 PM To: 'Juniper-Nsp' ([email protected]) Subject: [j-nsp] fpc fails to load after an upgrade of MX Hi All, We have MX960 router which we upgraded from 10.2R3 to 10.4R2, we are encountering problems with one of our FPCs The FPC is MX FPC Type 2 with 4x STM-4-1 SFP PIC and 1 SFP installed. We upgraded one of our REs and had some issues in bringing the FPC online, several times it said "unresponsive" when issuing the show chassis fpc command. Even after switching back to the RE with the 10.2R3 version it took it several minutes until the FPC was online. The current status is Offline with reason "Chassis connection dropped" and when trying to bring it online with the request chassis fpc slot 2 online command we get an error message "FPC 2 is in transition, try again". We upgraded another MX960 last week with the same exact FPC and software versions and had no such issues, did any one encounter such issues? Regards, Ido. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp ------Disclaimer------ This email and any files transmitted with are classified as confidential unless otherwise specified. This e-mail is intended solely for the use of the individual or entity to whom this e-mail is addressed. If you have received this email by mistake, please notify the sender and delete this e-mail immediately and permanently. Although measures were taken to free this e-mail and its attachments from any malicious code infection, it is the responsibility of the recipient to check this email and any attachments for the presence of such infection. The use of EEC(Mobily) e-mail service is limited for EEC(Mobily) business use only. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
