All the edge knob does is transition the port directly to the FWD state.
{master:0}[edit]
dhanks@EX4500-2# run show spanning-tree interface xe-0/0/38
Spanning tree interface parameters for instance 0
Interface Port ID Designated Designated Port State Role
port ID bridge ID Cost
xe-0/0/38.0 128:551 128:551 32768.50c58ea24540 2000 FWD ROOT
{master:0}[edit]
dhanks@EX4500-2# set protocols rstp interface xe-0/0/38 edge
{master:0}[edit]
dhanks@EX4500-2# commit
configuration check succeeds commit complete
{master:0}[edit]
dhanks@EX4500-2# run show spanning-tree interface xe-0/0/38
Spanning tree interface parameters for instance 0
Interface Port ID Designated Designated Port State Role
port ID bridge ID Cost
xe-0/0/38.0 128:551 128:551 32768.50c58ea24540 2000 FWD ROOT
{master:0}[edit]
dhanks@EX4500-2#
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Pavel Dimow
Sent: Tuesday, March 22, 2011 3:11 PM
To: [email protected]
Subject: [j-nsp] EX4200 BPDU on access port
Hi,
I have strange situation where my customer receives bpdu's on his
cisco switch from my ex4200 despite the fact that I have configured my
port as access (default in JUNOS)
and as edge on rstp configuration. Is this normal or I don't have luck
with 10.3 version?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
