Thanks Tim for making that much easier to understand ;) Appreciate it..
Paul From: Tim Jackson [mailto:[email protected]] Sent: Thursday, March 24, 2011 8:18 AM To: Paul Stewart Cc: juniper-nsp Subject: Re: [j-nsp] XFP-10G-L-OC192-SR1 They're fine to run back to back.. Average launch power -8.2 through 0.5 dBm Average receive power -14.4 through 0.5 dBm Receiver saturation 0.5 dBm You'll never launch hotter than the max RX.. They usually launch @ -2 -> -3dbm.. -- Tim On Thu, Mar 24, 2011 at 7:07 AM, Paul Stewart <[email protected]> wrote: Hi folks. These are "10KM" optics - how short of a run can you use them for? We have several of these spared at the moment and I'd like to use them for connections between MX480's in the same rack. will they run too hot? The specs on the Juniper site show: Transceiver model number XFP-10G-L-OC192-SR1 Optical interface Single-mode Transceiver type XFP Standard IEEE 802.3ae-2002 Maximum distance 9/125 SMF cable: 6.2 miles/10 km Transmitter wavelength 1260 through 1355 nm Average launch power -8.2 through 0.5 dBm Average receive power -14.4 through 0.5 dBm Receiver saturation 0.5 dBm Receiver sensitivity -14.4 dBm Thanks, Paul _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
