Erdems, Thanks. The error frequency is sporadic with the bgp continuously flapping. I will look at the config and post my findings. Regards,Jacob Miller
--- On Mon, 4/18/11, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Re: [j-nsp] Notification Cease Subcode 6 To: "jacob miller" <[email protected]> Cc: [email protected] Date: Monday, April 18, 2011, 5:08 PM Hello Jacob, This message would be seen when your local interface for the BGP peering becomes unavailable after a configuration change. Examples could be change of the IP address, adding the interface in a vrf whereas the bgp is still configured directly under [edit protocols bgp] etc. I would recommend doing a show route table inet.0 MY_PEER_ADDRESS (assuming your bgp is for inet.0) and see what is wrong. Cheers, Erdem On Mon, Apr 18, 2011 at 3:36 PM, jacob miller <[email protected]> wrote: Hi, Am getting the below error on my router with the BGP session with my provider. Cant make heads or tails of it. JUNIPER %DAEMON-4: bgp_ifachange_group:XXX: NOTIFICATION sent to <<MY PEER IP ADDRESS> (External AS <<<MY AS NUMBER>>>): code 6 (Cease) subcode 6 (Other Configuration Change), Reason: Interface change for the peer-group. Any assistance in decoding the error will be highly appreciated. Regards, Jacob Miller _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
