Hi,
Im currently running an ex4200 with 10.0S12.
I have tried to chain 2 output filters together on an RVI. The command
completes successfully and a 'commit check' does not throw up any errors. When
I look at the config the below appears:-
show interfaces vlan unit 965
##
## inactive: interfaces vlan unit 965
##
description DaDa-colocated-server;
proxy-arp;
family inet {
filter {
##
## Warning: statement ignored: unsupported platform (ex4200-48t)
##
output-list [ ACL_Template VLAN965 ];
Any ideas if this is supported in 10.4 as we have a standard ACL we use on most
customer vlans and then a customer specific vlan?
Nick
--
Nick Ryce
Network Engineer
Lumison
t: 0845 1199 900
d: +44 131 514 4049
P.S. Fancy some light reading? Clouds to networks, download a Lumison
whitepaper now at http://www.lumison.net/why-lumison/whitepapers
________________________________
--
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison accept no liability for any
damage caused by any virus transmitted by this email.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
