ge-0/0/0 is untrust, access to the internet
ge-0/0/3 and ge-0/0/2 trust, port mode access, vlan "x" id 3, l3 vlan.0 Source nat configured "source-nat interface" Policies "Trust to untrust" and "untrust to trust" any any any permit Device on ge-0/0/3 can ping device at ge-0/0/0 Laptop at ge-0/0/2 can surf the internet and shows correct ge-0/0/0 ip when consulted at whatsmyip However a l3 throughput test cannot be done neither a rfc2544 between device at ge-0/0/3 (loop) and device ge-0/0/0 (source). Monitoring interfaces I can see the traffic arriving at ge-0/0/0 but not being forwarded to ge-0/0/3, routes are correctly installed as the ping and internet surfig shows. Any idea? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
