Hi Chris, I have a MX960 with Junos 10.4R1.9 and I have the same problem, I have to do a restart of chassis-control process and the alarmas was cleared.
I hope to have help you. --- David On Mon, May 2, 2011 at 1:03 AM, Brent Jones <[email protected]> wrote: > On Sun, May 1, 2011 at 6:00 PM, Chris Kawchuk <[email protected]> > wrote: > > Heh. Good question! I just had to double check: > > > >> show config system > > commit synchronize; > > > > Thats in there...... OK let's try it manually..... > > > > ckawchuk@jmx480# commit synchronize and-quit > > re0: > > configuration check succeeds > > re1: > > commit complete > > re0: > > commit complete > > Exiting configuration mode > > > > {master} > > ckawchuk@jmx480> show chassis alarms > > 1 alarms currently active > > Alarm time Class Description > > 2011-04-07 11:19:35 EST Major Host 1 fxp0 : Ethernet Link Down > > > > Yeah... alarm still there. No worries - it's just an annoyance more than > anything. > > > > - Chris. > > > > > > On 2011-05-02, at 10:52 AM, OBrien, Will wrote: > > > >> Silly question... You did use commit sync, correct? > >> > >> Will O'Brien > >> > >> On May 1, 2011, at 7:51 PM, "Chris Kawchuk" <[email protected]> > wrote: > >> > >>> Hi Paul..! > >>> > >>> Yeah - I tried that as well initially with no luck.... (and just tried > again just now...) > >>> > >>> me@wowter> show configuration chassis > >>> alarm { > >>> management-ethernet { > >>> link-down ignore; > >>> } > >>> } > >>> > >>> user@wowter> show chassis alarms > >>> 1 alarms currently active > >>> Alarm time Class Description > >>> 2011-04-07 11:19:35 EST Major Host 1 fxp0 : Ethernet Link Down > >>> > >>> ... Which now definitely leads me to suspect it's a bug in this > release; as you don't seem have this issue in 10.0 =) > >>> > >>> Thanks! I'll ignore it for now, and see what happens when we do our > 10.4 upgrade soon. > >>> > >>> - Chris. > >>> > >>> > >>> > >>> On 2011-05-02, at 10:42 AM, Paul Stewart wrote: > >>> > >>>> Hey Chris... > >>>> > >>>> On MX480's running 10.0R3.10 we just have it setup as: > >>>> > >>>> [email protected]> show chassis alarms > >>>> No alarms currently active > >>>> > >>>> [email protected]> show configuration chassis alarm > >>>> management-ethernet { > >>>> link-down ignore; > >>>> } > >>>> > >>>> Thanks, > >>>> > >>>> Paul > >>> > >>> > >>> _______________________________________________ > >>> juniper-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > On EX switches, I've had the alarm get stuck. I had to restart > chassis-control and it went away > > -- > Brent Jones > [email protected] > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
