> I am testing the RE based flow export from my Juniper M7i running > 9.2R2.15 , for some reason my flow analyzer wrapped up all the flows in > instance 0 interface for all the flows exported, at the same time all > the export from all the Cisco is working and showing up perfectly. > > Upon investigating the sflow packets through wireshark, it is found that > all the captured sflow frames from M7i has Input interface and Output > interface information id is "0" thus Interface ID is not exported. Is > this the know issue or are there any configuration miss? any workaround > or fix?
Known problem for at least some JunOS versions running on the MX. PR id 286089, resolved in 9.1R4; 9.2R3; 9.3R3; 9.5R2; 9.6R1; 10.0R1 according to the info in the PR. No idea whether this applies to M7i though. Steinar Haug, Nethelp consulting, [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
