On Friday, June 03, 2011 11:31:51 PM Serge Vautour wrote: > Would it be possible for you to share what code version > you recommend for Trio? We've had a few MX80s in Prod > with 10.2S6 for a while now. We need to add MPC cards to > our MX960s and are struggling what version to go with. > Continue with 10.2 or move to 10.4? We're also planning > on adding alot more MX80s.
For the chassis-based MX's, we've generally found happiness in staying current for Junos 10.4 (now at 10.4R4.5). This has fixed random PFE crashes, FPC reboots, e.t.c., since the boxes shipped with 10.4R1. We're actively staying away from Junos 11 for now. One thing to think seriously about is whether you're going to run your MX's with a mixture of DPC's and MPC's. Depending on which features you need to turn on, you may not be able to boot DPC cards if you have MPC's installed as well. I'd seriously suggest checking with your SE before turning up any features if you're going to mix DPC's and MPC's, or if certain features for the MPC's "seem" kinky. We've had too much pain for some items. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
