The only available way to monitor IPv6 traffic from management platform is using jflow version 9. Not all equipments have this feature available since its hardware based. We run v9 on MX and T platforms with MS-PIC/MS-DPC cards.
The RFC 4293 describe new MIB to monitor traffic based on address family, but JunOS does support it yet. Rgds Enviado via iPhone Em 10/06/2011, às 05:02, L Kennedy <[email protected]> escreveu: > Hi, > > I enabled v6 on a one of my SRX240s (inspired by IPv6 day yesterday) - apart > of lack of UTM, seems to work fine but how do I monitor how much traffic is > actually going over v6? > > Theres no v6 JFlow, even though our STRM (where the flow data is going) does > have a filter for v6 traffic; and the Juniper v6 MIB seems to only measure > total v6 packets *to* the box itself, not transit packets. > > The upstream MX does have v6 interface counters (though the SRX doesn't) but > again there doesn't seem to be any way of querying them over SNMP - anyone > have any ideas? > > Liam. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
