Noticed this e-book a couple days ago and just finished going through it - very good stuff in there! Lots of examples with detailed explanations. Love the idea of splitting up the 'protect-re' filter into manageable filters and chaining them together (flags omit is very nice :) ). Thanks to all who put this together!
On Jun 21, 2011, at 8:01 PM, Harry Reynolds wrote: > Hey all, Please pardon the wide distribution. I recall seeing postings on > this list regarding current best practices for securing Juniper Networks > Routing Engines via firewall filters. > > If interested I suggest you check out the newest addition to the "day 1" > series of e-books titled "Securing the Routing Engine on M, MX, and T series > Routers", By Doug Hanks, available for download at the link below. > > While there I suggest you also snag the new "tips techniques, and templates" > book. > > http://www.juniper.net/us/en/community/junos/training-certification/day-one/fundamentals-series/securing-routing-engine/ > > http://www.juniper.net/us/en/community/junos/training-certification/day-one/fundamentals-series/junos-tips-techniques/ > > Disclaimer: I participated as a technical editor in the tricks and technique > book. Don't let the day 1 title throw you off. I believe there are many > useful things to be learned by just about everyone, somewhere in this little > book's power-packed pages. > > Perhaps the "day 1" bit signifies a collection of things you wish you had > *known* from day 1. ;) I know I'm using "show | match <foo> | display set" > all the time now. ;) > > Regards > > > Harry > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
